Product Overview
This is a used half wood-trim steering wheel removed from a Mercedes-Benz W211 E240 V6. It combines a leather-wrapped grip with wood inlay panels and typically includes multifunction controls for audio and trip computer settings, matching the higher-spec trim of the V6 model. It was taken from a running vehicle and checked before being listed.

Key Features
– Original half wood-and-leather steering wheel, correct fit for the W211 E240 V6
– Multifunction buttons checked for physical condition and response
– Wood trim inspected for cracking, fading, or lifting
– Leather grip checked for wear, tears, and stitching condition
– Restores the higher-spec cabin look associated with the V6 trim level

Compatibility & Fitment
Fitment: Mercedes-Benz W211 E240 V6
Placement: Steering Column (Front)

Condition & Inspection
Wood trim and leather were checked by hand for cracking, peeling, and stitching wear, and multifunction buttons were pressed to confirm they engage correctly. Minor surface wear typical of a used wheel may be present, but the unit is structurally sound and ready to install.

Installation Information
This wheel fits onto the original steering column hub without modification. Since this variant includes multifunction controls, confirm the wiring connector matches your car’s specific control module before fitting.

Advantages
For E240 V6 owners, this restores both the wood-and-leather look and the multifunction controls expected on this trim level, without the cost of sourcing new-old-stock parts. It’s a direct way to bring the cabin back to its factory V6-spec finish.

Product Overview
This is a used half wood steering wheel removed from a Mercedes-Benz W202 C200. It pairs a leather-wrapped grip with wood trim panels, giving the cabin a warmer, more upscale feel than the standard all-leather wheel. It was taken from a running vehicle and checked over before listing.

Key Features
– Original half wood-and-leather steering wheel, correct fit for the W202 C200
– Wood panels checked for cracking, fading, or lifting from the base
– Leather section inspected for wear, tears, and stitching integrity
– Upgrades or restores the cabin’s interior finish without a full retrim
– Straightforward swap for a cracked, worn, or non-wood replacement wheel

Compatibility & Fitment
Fitment: Mercedes-Benz W202 C200
Placement: Steering Column (Front)

Condition & Inspection
Wood trim and leather were checked by hand for cracking, peeling, and loose stitching. Minor surface wear typical of a used wheel may be present, but the unit is structurally sound and ready to install.

Installation Information
This wheel fits onto the original W202 steering column hub without modification. If your car has airbag or steering-mounted controls, check wiring and connector compatibility before swapping.

Advantages
For C200 owners wanting the wood-and-leather cabin look, this gives back that factory-style finish without the cost of a full retrim or sourcing new-old-stock parts. It’s an easy way to lift the interior’s feel at a fraction of the price of a new wheel.

Product Overview
This is a used steering wheel removed from a Mercedes-Benz W211. It carries the factory grip shape and control layout for this platform, giving direct control over the car’s direction. This unit was taken from a running vehicle and checked for condition before being listed.

Key Features
– Original W211 steering wheel, correct fit and factory grip shape
– Leather or trim surface checked for wear, tears, and shine
– Multifunction buttons (where fitted) checked for physical condition
– Straightforward replacement for a worn, cracked, or damaged wheel
– Retains factory hub and mounting for a direct swap

Compatibility & Fitment
Fitment: Mercedes-Benz W211
Placement: Steering Column (Front)

Condition & Inspection
The wheel was checked by hand for cracking, peeling, or loose stitching on the grip, along with the condition of any buttons or trim. Minor wear consistent with normal use may be present, but the unit is structurally sound and ready for use.

Installation Information
This wheel bolts onto the original W211 steering column hub without modification. If your car has airbag or multifunction controls, confirm wiring and connector compatibility with your specific trim level before fitting.

Advantages
Swapping in a genuine used steering wheel restores proper grip feel and cabin appearance without the cost of a new unit or aftermarket alternative. It’s a simple way to fix a worn or damaged wheel while keeping the factory look and feel.

Key Features
– Original half wood-and-leather steering wheel for the W124 E220
– Wood trim inspected for cracking, fading, or lifting
– Leather grip checked for wear, tears, and stitching condition
– Restores the factory interior look without needing a full retrim
– A direct swap for owners replacing a cracked, worn, or non-wood wheel

Compatibility & Fitment
Fitment: Mercedes-Benz W124 E220
Placement: Steering Column (Front)

Condition & Inspection
The wood trim and leather have been checked by hand for cracks, peeling, and stitching wear. Some light surface wear consistent with age and use may be present, but the wheel is structurally sound and ready for use.

Installation Information
This wheel bolts onto the original steering column using the factory mounting hub, so no modification is needed. If your car has airbag or control switches on the wheel, confirm wiring compatibility before fitting.

Advantages
For W124 owners restoring the cabin or replacing a damaged wheel, this gives back the wood-and-leather look without the expense of retrimming a wheel or buying new old-stock parts. It’s a cost-effective way to keep the interior looking and feeling original.

Product Overview

This listing is for a used Mitsubishi Storm L200 4×4 Rear Axle designed specifically for Mitsubishi Storm L200 4×4 pickup models. This genuine OEM original rear axle assembly belongs to the Steering & Suspension category and plays a vital role in transferring engine power to the rear wheels while supporting vehicle stability, load capacity, and overall driving performance. Removed from a donor vehicle, this tested used rear axle has been carefully inspected and prepared for reliable replacement. It is an ideal solution for restoring factory drivetrain performance while maintaining original Mitsubishi specifications.

Key Features

– Genuine OEM Original Mitsubishi Rear Axle Assembly
– Designed specifically for Mitsubishi Storm L200 4×4 models
– Original factory drivetrain and suspension component
– Tested used auto part removed from a donor vehicle
– Maintains original fitment and factory mounting points
– Supports smooth power delivery and rear-wheel stability
– Suitable for vehicle restoration, repair, and maintenance
– Carefully inspected before listing for reliable performance

Compatibility & Fitment

Fitment:
Mitsubishi Storm L200 4×4

Drivetrain:
4WD (Four-Wheel Drive)

Category:
Steering & Suspension

Placement on Vehicle:
Rear

Please compare your existing rear axle assembly, differential type, axle configuration, and vehicle specifications before purchasing to ensure correct compatibility with your Mitsubishi Storm L200 4×4.

Condition & Inspection

This genuine used OEM Mitsubishi Storm L200 4×4 Rear Axle has been removed from a donor vehicle and carefully inspected before being offered for sale. The axle housing, mounting points, differential casing, and related components have been visually examined to ensure they remain suitable for replacement use. As with all previously installed automotive components, normal cosmetic signs of use such as light surface rust, scratches, dirt residue, or handling marks may be present. These are typical characteristics of genuine used auto parts and do not affect the intended function of the assembly. Customers are encouraged to review all available product images and verify compatibility before installation.

Installation Information

The Mitsubishi Storm L200 4×4 Used Rear Axle OEM Original Malaysia is designed as a direct replacement for the original factory-installed rear axle assembly. Installation utilizes the vehicle’s original mounting points, suspension components, and drivetrain connections for accurate factory fitment. Professional installation is strongly recommended to ensure proper alignment, differential setup, lubrication, and safe operation. It is also advisable to inspect related components such as leaf springs, shock absorbers, axle bearings, seals, brake assemblies, and driveshaft connections during installation to achieve the best long-term performance and reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Used Rear Axle OEM Original Malaysia provides a cost-effective alternative to purchasing a brand-new replacement while preserving genuine factory quality and durability. OEM used drivetrain components are manufactured to Mitsubishi’s original engineering standards, ensuring precise fitment, dependable performance, and long service life. This tested used rear axle assembly is an excellent choice for workshops, mechanics, off-road enthusiasts, fleet owners, and Mitsubishi owners looking for reliable used auto parts in Malaysia.

Used rear axle assembly for Mitsubishi Storm L200 4×4, supplied as a replacement drivetrain component. Suitable for repair, replacement and restoration applications.

This ready-to-install Mitsubishi Storm L200 4×4 Rear Axle is supplied as a genuine OEM used auto part, helping restore the vehicle’s original drivetrain performance, stability, load-carrying capability, and driving confidence for both daily use and demanding off-road conditions.

Product Overview

This listing is for a used Mitsubishi Storm L200 4×4 Leaf Spring designed specifically for Mitsubishi Storm L200 4×4 pickup models. This genuine OEM original leaf spring belongs to the Steering & Suspension category and plays a vital role in supporting the vehicle’s suspension system, maintaining ride height, absorbing road impacts, and providing stability when carrying heavy loads. Removed from a donor vehicle, this tested used leaf spring has been carefully inspected and prepared for reliable replacement. It is an excellent solution for restoring the vehicle’s original suspension performance while maintaining factory Mitsubishi specifications.

Key Features

– Genuine OEM Original Mitsubishi Leaf Spring
– Designed specifically for Mitsubishi Storm L200 4×4 models
– Original factory suspension system component
– Tested used auto part removed from a donor vehicle
– Maintains original factory fitment and mounting points
– Supports vehicle load capacity, ride stability, and suspension performance
– Suitable for vehicle repair, restoration, and suspension maintenance
– Carefully inspected before listing for dependable performance

Compatibility & Fitment

Fitment:
Mitsubishi Storm L200 4×4

Category:
Steering & Suspension

Placement on Vehicle:
Rear

Please compare your existing leaf spring assembly, mounting brackets, and suspension specifications before purchasing to ensure correct compatibility with your Mitsubishi Storm L200 4×4.

Condition & Inspection

This genuine used OEM Mitsubishi Storm L200 4×4 Leaf Spring has been removed from a donor vehicle and thoroughly inspected before being offered for sale. The leaf spring assembly, mounting points, spring leaves, bushings, and overall structure have been visually examined to ensure suitability for replacement use. As with all previously installed automotive components, normal cosmetic signs of use such as light surface rust, scratches, dirt residue, or handling marks may be present. These are typical characteristics of genuine used auto parts and do not affect the intended functionality of the suspension component. Customers are encouraged to review all available product images and verify compatibility before installation.

Installation Information

The Mitsubishi Storm L200 4×4 Used Leaf Spring OEM Original Malaysia is designed as a direct replacement for the original factory-installed leaf spring assembly. Installation utilizes the vehicle’s original mounting points, shackles, U-bolts, and suspension hardware for accurate OEM fitment. Professional installation is highly recommended to ensure correct alignment, ride height, suspension geometry, and safe operation. It is also advisable to inspect related suspension components such as shock absorbers, spring bushings, U-bolts, shackles, axle mounts, and mounting brackets during installation to achieve optimal handling, load-carrying performance, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Used Leaf Spring OEM Original Malaysia provides a reliable and cost-effective alternative to purchasing a brand-new replacement while preserving genuine factory quality and engineering standards. OEM used suspension components are manufactured to Mitsubishi’s original specifications, ensuring precise fitment, dependable durability, and excellent load-bearing performance. This tested used leaf spring is an excellent choice for workshops, mechanics, commercial vehicle owners, off-road enthusiasts, and Mitsubishi owners looking for high-quality used auto parts in Malaysia.

This ready-to-install Mitsubishi Storm L200 4×4 Leaf Spring is supplied as a genuine OEM used auto part, helping restore the vehicle’s original suspension performance, ride comfort, load capacity, and driving stability for everyday use, commercial applications, and demanding off-road conditions.

Product Overview

This listing is for a used Mitsubishi Storm L200 4×4 Power Steering Pump designed specifically for Mitsubishi Storm L200 4×4 pickup models equipped with the 4D56T diesel engine. This genuine OEM original power steering pump belongs to the Steering & Suspension category and plays a crucial role in supplying hydraulic pressure to the power steering system, allowing for smooth, responsive, and effortless steering control. Removed from a donor vehicle, this tested used power steering pump has been carefully inspected and prepared for reliable replacement. It is an excellent solution for restoring factory steering performance while maintaining original Mitsubishi specifications.

Key Features

– Genuine OEM Original Mitsubishi Power Steering Pump
– Designed specifically for Mitsubishi Storm L200 4×4 models
– Compatible with 4D56T diesel engine applications
– Original factory hydraulic steering system component
– Tested used auto part removed from a donor vehicle
– Maintains original factory fitment and hydraulic connections
– Delivers consistent hydraulic pressure for smooth steering response
– Suitable for vehicle repair, restoration, and steering system maintenance
– Carefully inspected before listing for reliable operation

Compatibility & Fitment

Fitment:
Mitsubishi Storm L200 4×4

Engine Compatibility:
4D56T Diesel

Category:
Steering & Suspension

Placement on Vehicle:
Engine Bay

Please compare your existing power steering pump, pulley design, hydraulic hose connections, and engine specifications before purchasing to ensure correct compatibility with your Mitsubishi Storm L200 4×4.

Condition & Inspection

This genuine used OEM Mitsubishi Storm L200 4×4 Power Steering Pump has been removed from a donor vehicle and thoroughly inspected before being offered for sale. The pump housing, pulley, mounting points, hydraulic ports, and overall assembly have been visually examined to ensure suitability for replacement use. As with all previously installed automotive components, normal cosmetic signs of use such as light scratches, surface oxidation, dirt residue, or handling marks may be present. These are typical characteristics of genuine used auto parts and do not affect the intended functionality of the component. Customers are encouraged to review all available product images and verify compatibility before installation.

Installation Information

The Mitsubishi Storm L200 4×4 Used Power Steering Pump OEM Original Malaysia is designed as a direct replacement for the original factory-installed power steering pump. Installation utilizes the vehicle’s original mounting points, drive belt system, and hydraulic hose connections for accurate OEM fitment. Professional installation is highly recommended to ensure correct belt tension, proper hydraulic fluid bleeding, secure hose connections, and optimal steering performance. It is also advisable to inspect related components such as the power steering reservoir, steering box, drive belt, pulley, hydraulic hoses, and steering fluid during installation to achieve long-term reliability and smooth steering operation.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Used Power Steering Pump OEM Original Malaysia provides a reliable and cost-effective alternative to purchasing a brand-new replacement while preserving genuine factory quality and engineering standards. OEM used steering components are manufactured to Mitsubishi’s original specifications, ensuring precise fitment, dependable hydraulic performance, and long service life. This tested used power steering pump is an excellent choice for workshops, mechanics, commercial vehicle owners, off-road enthusiasts, and Mitsubishi owners looking for high-quality used auto parts in Malaysia.

Used OEM original power steering pump for Mitsubishi Storm L200 4×4, supplied as a replacement steering system component. Suitable for repair, replacement and restoration applications.

This ready-to-install Mitsubishi Storm L200 4×4 Power Steering Pump is supplied as a genuine OEM used auto part, helping restore the vehicle’s original steering performance, hydraulic efficiency, and driving comfort for everyday use, commercial applications, and demanding off-road conditions.

Key Features
– Designed to fit Volvo S80 T6 platform
– Supports consistent performance and reliability
– Thoroughly inspected and tested before listing
– Retains original fit and ease of installation
– Suitable replacement option for restoration and maintenance

Compatibility & Fitment
Fitment: Volvo S80 T6 (1999-2006)
Placement on Vehicle: Front

Condition & Inspection
This part has been checked to ensure it is in working order. Surfaces may show signs of use typical of a previously installed component, but functionality has been confirmed. Each item is visually inspected and verified to meet expectations for a used automotive part.

Installation Information
Installation is straightforward, designed for original mounting points and connections. Professional installation is recommended to achieve the best results and long-term reliability.

Advantages
Choosing this Volvo S80 T6 Power Steering Pump 2.9T provides a reliable way to maintain your vehicle’s function. With correct fitment and tested quality, it is a practical solution for keeping your vehicle running smoothly.

This component is offered as a ready-to-install part, ensuring that your Volvo S80 T6 continues to perform as expected in everyday driving conditions.

Key Features
– Designed to fit Hyundai Starex A2 platform
– Supports consistent performance and reliability
– Thoroughly inspected and tested before listing
– Retains original fit and ease of installation
– Suitable replacement option for restoration and maintenance

Compatibility & Fitment
Fitment: Hyundai Starex A2 (2007 – 2016)
Placement on Vehicle: Front

Condition & Inspection
This part has been checked to ensure it is in working order. Surfaces may show signs of use typical of a previously installed component, but functionality has been confirmed. Each item is visually inspected and verified to meet expectations for a used automotive part.

Installation Information
Installation is straightforward, designed for original mounting points and connections. Professional installation is recommended to achieve the best results and long-term reliability.

Advantages
Choosing this Hyundai Starex A2 Steering Rack provides a reliable way to maintain your vehicle’s function. With correct fitment and tested quality, it is a practical solution for keeping your vehicle running smoothly.

This component is offered as a ready-to-install part, ensuring that your Hyundai Starex A2 continues to perform as expected in everyday driving conditions.

Key Features
-Designed specifically for the Mercedes-Benz W210 platform-
-OEM Avantgarde Suspension Spring
-Provides firmer, sport-oriented ride characteristics
-Maintains proper vehicle ride height and balance
-Enhances handling and road stability
-Built to match original mounting and suspension geometry
-Cleaned and inspected for structural integrity
-Compatible with W210 Avantgarde variants

Compatibility & Fitment
This component is compatible with Mercedes-Benz W210 Avantgarde models manufactured between 1995 and 2002. It is designed to integrate seamlessly with the original suspension system.

Fitment:
Mercedes-Benz W210 E-Class Avantgarde (1995–2002)

Placement on Vehicle:
Suspension – Front or Rear

Condition & Inspection
This is a genuine used OEM suspension spring sourced from a W210 donor vehicle. Each unit is thoroughly inspected for cracks, deformation, and tension integrity. Minor cosmetic signs such as surface rust or aging may be present due to prior use, but these do not affect performance when properly installed.

Installation Information
The suspension spring is designed as a direct replacement component and fits within the suspension assembly. Installation involves compressing the spring and securing it with the shock absorber system. Professional installation is strongly recommended to ensure safety and proper alignment.

Advantages
Choosing this used OEM Mercedes W210 Avantgarde Spring provides an affordable solution for restoring sporty ride characteristics and suspension performance. OEM components ensure precise fitment, correct ride feel, and long-term durability compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while maintaining the authenticity and value of your Mercedes-Benz W210.

An excellent choice for restoring handling and ride balance in your Mercedes-Benz W210 Avantgarde.