Product Overview
This is a used Mercedes-Benz M112 V6 engine removed from a Mercedes-Benz W211 E240. The M112 is a 2.6-litre V6 unit known for its smooth, refined power delivery compared to the four-cylinder options on this platform. This engine was pulled from a running vehicle and checked before being listed.

Key Features
– Genuine Mercedes-Benz M112 V6 engine, correct fit for the W211 E240
– Started and run to confirm smooth idle and no unusual knocking
– Complete unit including intake manifold and ancillaries as fitted
– A cost-effective alternative to a full engine rebuild or new unit
– Suited to owners doing an engine replacement or V6 upgrade

Compatibility & Fitment
Fitment: Mercedes-Benz W211 E240 V6
Engine Code: M112
Placement: Engine Bay

Condition & Inspection
This engine was started and run to check idle quality, listen for knocking or unusual noise, and confirm oil pressure builds correctly. It carries wear consistent with its age, but no signs of internal mechanical failure were found during inspection.

Installation Information
This is a direct swap into the original W211 E240 engine bay layout, using the same mounting points. As with any V6 swap involving wiring harnesses, sensors, and fluid systems, we recommend fitting by a mechanic experienced with Mercedes-Benz V6 engines.

Advantages
A tested used M112 engine gives V6 owners a way to replace a failed or worn engine without the expense of a brand-new unit or the risk of an unverified rebuild. It’s a practical route back to the smooth six-cylinder performance the E240 is known for.

Product Overview
This listing is for a used Mercedes W124 E220 Engine M111 designed for Mercedes-Benz W124 E220. It belongs to the Engine M111 category and plays an important role in powering the vehicle by converting fuel into mechanical energy. The component is sourced from tested vehicles and prepared for reliable use.

Key Features
– Designed to fit Mercedes-Benz W124 E220 platform
– Supports consistent performance and reliability
– Thoroughly inspected and tested before listing
– Retains original fit and ease of installation
– Suitable replacement option for restoration and maintenance

Compatibility & Fitment
Fitment: Mercedes-Benz W124 E220
Placement on Vehicle: Standard Position

Condition & Inspection
This part has been checked to ensure it is in working order used Mercedes-Benz engine Malaysia. Surfaces may show signs of use typical of a previously installed component, but functionality has been confirmed. Each item is visually inspected and verified to meet expectations for a used automotive part.

Installation Information
Installation is straightforward, designed for original mounting points and connections. Professional installation is recommended to achieve the best results and long-term reliability.

Advantages
Choosing this Mercedes W124 E220 Engine M111 provides a reliable way to maintain your vehicle’s function. With correct fitment and tested quality, it is a practical solution for keeping your car running smoothly. This product combines durability and reliability, making it a smart choice for owners looking to preserve the performance and integrity of their vehicle.

This component is offered as a ready-to-install part, ensuring that your Mercedes-Benz W124 E220 continues to perform as expected in everyday driving conditions.

Product Overview

This listing is for a used Mitsubishi Storm L200 4×4 Engine 4D56T designed specifically for Mitsubishi Storm L200 4×4 pickup models. This genuine OEM original 4D56T turbo diesel engine belongs to the Engine Components category and serves as the heart of the vehicle, delivering reliable power, torque, fuel efficiency, and long-lasting performance for both on-road driving and demanding off-road applications. Removed from a donor vehicle, this tested used engine has been carefully inspected and prepared for dependable replacement. It is an excellent solution for replacing a damaged, worn, or failed engine while maintaining the vehicle’s original factory specifications.

Key Features

– Genuine OEM Original Mitsubishi 4D56T Engine
– Designed specifically for Mitsubishi Storm L200 4×4 models
– Compatible with 4D56T Turbo Diesel engine applications
– Original factory complete engine assembly
– Tested used auto part removed from a donor vehicle
– Maintains original factory fitment and engine mounting points
– Delivers reliable engine performance, torque, and fuel efficiency
– Suitable for vehicle repair, restoration, engine replacement, and maintenance
– Carefully inspected before listing for dependable operation

Compatibility & Fitment

Fitment:
Mitsubishi Storm L200 4×4

Engine Code:
4D56T Turbo Diesel

Category:
Engine Components

Placement on Vehicle:
Engine Bay

Please compare your existing engine code, engine mounting configuration, transmission compatibility, and vehicle specifications before purchasing to ensure correct compatibility with your Mitsubishi Storm L200 4×4.

Condition & Inspection

This genuine used OEM Mitsubishi Storm L200 4×4 Engine 4D56T has been removed from a donor vehicle and thoroughly inspected before being offered for sale. The engine block, cylinder head, mounting points, and external components have been visually examined to ensure suitability for replacement use. As with all previously installed automotive components, normal cosmetic signs of use such as light oil residue, surface oxidation, minor scratches, or handling marks may be present. These are typical characteristics of genuine used auto parts and do not affect the intended functionality of the engine. Customers are encouraged to review all available product images and verify compatibility before installation.

Installation Information

The Mitsubishi Storm L200 4×4 Used Engine 4D56T OEM Original Malaysia is designed as a direct replacement for the original factory-installed 4D56T engine. Professional installation is strongly recommended to ensure correct engine alignment, wiring connections, cooling system setup, fuel system integration, and ECU compatibility. It is also advisable to inspect or replace related components such as the turbocharger, timing belt, water pump, engine mounts, radiator hoses, alternator, starter motor, and engine sensors during installation to achieve optimal performance and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Used Engine 4D56T OEM Original Malaysia provides a reliable and cost-effective alternative to purchasing a brand-new engine while preserving genuine factory quality and engineering standards. OEM used engines are manufactured to Mitsubishi’s original specifications, ensuring precise fitment, dependable performance, and long service life. This tested used 4D56T engine is an excellent choice for workshops, mechanics, fleet operators, commercial vehicle owners, off-road enthusiasts, and Mitsubishi owners looking for high-quality used auto parts in Malaysia.

This ready-to-install Mitsubishi Storm L200 4×4 Engine 4D56T is supplied as a genuine OEM used auto part, helping restore your vehicle’s original power, fuel efficiency, reliability, and overall driving performance for daily use, commercial operations, and challenging off-road environments.

Looking for a genuine replacement Power Steering Pump for your Mitsubishi Storm L200 4×4? This used OEM Mitsubishi Storm L200 4×4 Power Steering Pump is compatible with Mitsubishi Storm L200 4×4 (1996–2005) models and is sourced from a tested donor vehicle in Malaysia. It belongs to the Steering System category and is designed to provide consistent hydraulic pressure for smooth steering operation, improved vehicle control, and comfortable driving performance.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM power steering pump assembly
* Thoroughly inspected and tested before listing
* Maintains factory steering assistance and hydraulic performance
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Front

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points, pulley alignment, and hydraulic connections. Professional installation is recommended to ensure proper steering performance, leak-free operation, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Power Steering Pump provides a cost-effective solution for restoring your vehicle’s steering performance. With tested OEM quality and precise fitment, it is an excellent replacement for a worn or faulty power steering pump while maintaining smooth steering response, reliable hydraulic pressure, and the original driving characteristics of your Mitsubishi Storm L200 4×4.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable steering performance and confident handling in everyday driving and demanding off-road conditions.

Looking for a genuine replacement fuel tank for your Mitsubishi Storm L200 4×4? This used OEM Mitsubishi Storm L200 4×4 Petrol Tank is compatible with Mitsubishi Storm L200 4×4 (1996–2005) models and is sourced from a tested donor vehicle in Malaysia. It belongs to the Fuel System category and is designed to safely store fuel, maintain proper fuel supply to the engine, and preserve the original factory fuel system performance.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM petrol tank assembly
* Thoroughly inspected and tested before listing
* Maintains factory fuel storage capacity and secure fitment
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Rear

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points, fuel lines, and connections. Professional installation is recommended to ensure proper sealing, leak-free operation, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Petrol Tank provides a cost-effective solution for restoring your vehicle’s fuel storage system. With tested OEM quality and precise fitment, it is an excellent replacement for a damaged or corroded fuel tank while maintaining safe fuel containment, reliable fuel delivery, and the original performance of your Mitsubishi Storm L200 4×4.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable performance and efficient fuel system operation for everyday driving and demanding work conditions.

Looking for a genuine replacement Fuel Pump Turbo for your Mitsubishi Storm L200 4×4? This used OEM Mitsubishi Storm L200 4×4 Fuel Pump Turbo is compatible with Mitsubishi Storm L200 4×4 (1996–2005) models and is sourced from a tested donor vehicle in Malaysia. It belongs to the Fuel System category and is designed to deliver consistent fuel pressure to the turbo diesel engine, ensuring efficient fuel delivery, reliable engine performance, and smooth vehicle operation.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM turbo diesel fuel pump
* Thoroughly inspected and tested before listing
* Maintains factory fuel delivery and engine performance
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Engine Bay

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points, fuel lines, and engine connections. Professional installation is recommended to ensure proper fuel pressure, engine timing, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Fuel Pump Turbo provides a cost-effective solution for restoring your vehicle’s fuel delivery system. With tested OEM quality and precise fitment, it is an excellent replacement for a worn or faulty fuel pump while maintaining reliable fuel flow, efficient engine operation, and the original performance of your Mitsubishi Storm L200 4×4.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable fuel system performance and reliable driving under everyday and heavy-duty conditions.

Looking for a genuine replacement Rear Axle for your Mitsubishi Storm L200 4×4? This used OEM Mitsubishi Storm L200 4×4 Rear Axle is compatible with Mitsubishi Storm L200 4×4 (1996–2005) models and is sourced from a tested donor vehicle in Malaysia. It belongs to the Drivetrain & Differential Components category and is designed to deliver reliable power transfer, stable rear-wheel performance, and dependable operation under everyday driving and off-road conditions.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM rear axle assembly
* Thoroughly inspected and tested before listing
* Maintains factory drivetrain performance and axle alignment
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Rear

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points and drivetrain connections. Professional installation is recommended to ensure proper axle alignment, differential operation, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Rear Axle provides a cost-effective solution for restoring your vehicle’s drivetrain performance. With tested OEM quality and precise fitment, it is an excellent replacement for a worn or damaged rear axle while maintaining smooth power delivery, driving stability, and the original handling characteristics of your Mitsubishi Storm L200 4×4.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable drivetrain performance for both daily driving and demanding off-road applications.

Looking for a genuine replacement brake booster for your Mitsubishi Storm L200 4×4? This used OEM Mitsubishi Storm L200 4×4 Brake Booster Set is compatible with Mitsubishi Storm L200 4×4 (1996–2005) models and is sourced from a tested donor vehicle in Malaysia. It belongs to the Braking System category and is designed to restore reliable brake assistance, improve pedal response, and maintain safe braking performance.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM brake booster set
* Thoroughly inspected and tested before listing
* Maintains factory brake assist performance and pedal feel
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Front

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points and brake system connections. Professional installation is recommended to ensure proper brake operation, system safety, and long-term reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Brake Booster Set provides a cost-effective solution for restoring your vehicle’s braking performance. With tested OEM quality and precise fitment, it is an excellent replacement for a faulty or worn brake booster while maintaining factory braking efficiency, pedal feel, and driving confidence.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable braking performance for everyday driving and demanding conditions.

This listing is for a used Mitsubishi Storm L200 4×4 Alternator designed for Mitsubishi Storm L200 4×4. It belongs to the Electrical Components category and plays an important role in generating electrical power, charging the vehicle’s battery, and supplying electricity to essential vehicle systems while the engine is running. This original OEM alternator is sourced from a tested donor vehicle in Malaysia and prepared for reliable use.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM alternator assembly
* Thoroughly inspected and tested before listing
* Maintains stable battery charging and electrical system performance
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Front

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points and electrical connections. Professional installation is recommended to ensure proper charging performance, belt alignment, and long-term electrical system reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Alternator provides a cost-effective solution for restoring your vehicle’s charging system. With tested OEM quality and precise fitment, it is an excellent replacement for a faulty or worn alternator while maintaining reliable battery charging, stable electrical output, and dependable everyday driving performance.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver consistent electrical performance and reliable operation under everyday driving conditions.

This listing is for a used Mitsubishi Storm L200 4×4 Leaf Spring designed for Mitsubishi Storm L200 4×4. It belongs to the Suspension & Steering category and plays an important role in supporting vehicle load capacity, maintaining ride height, and providing stability during everyday driving and heavy-duty applications. This original OEM leaf spring is sourced from a tested donor vehicle in Malaysia and prepared for reliable use.

Key Features

* Designed to fit Mitsubishi Storm L200 4×4 models
* Original OEM leaf spring assembly
* Thoroughly inspected and tested before listing
* Maintains original suspension performance and load-bearing capability
* Suitable replacement option for restoration, repair, and maintenance

Compatibility & Fitment

Fitment: Mitsubishi Storm L200 4×4 (1996–2005)
Placement on Vehicle: Rear

Condition & Inspection

This part has been checked to ensure it is in working order before listing. It has been removed from a tested donor vehicle and visually inspected to verify its functionality. As a genuine used OEM component, it may show normal cosmetic signs of previous use while maintaining reliable operating condition.

Installation Information

Installation is designed for the original factory mounting points and connections. Professional installation is recommended to ensure proper suspension alignment, load distribution, and long-term driving reliability.

Advantages

Choosing this Mitsubishi Storm L200 4×4 Leaf Spring provides a cost-effective solution for restoring the original suspension performance of your vehicle. With tested OEM quality and precise fitment, it is an excellent replacement for a worn or damaged leaf spring while maintaining factory ride height, load-carrying capacity, and driving stability.

This component is offered as a ready-to-install used OEM part, helping your Mitsubishi Storm L200 4×4 continue to deliver dependable suspension performance for both daily driving and heavy-duty use.