Product Overview
This is a used half wood steering wheel removed from a Mercedes-Benz W202 C200. It pairs a leather-wrapped grip with wood trim panels, giving the cabin a warmer, more upscale feel than the standard all-leather wheel. It was taken from a running vehicle and checked over before listing.

Key Features
– Original half wood-and-leather steering wheel, correct fit for the W202 C200
– Wood panels checked for cracking, fading, or lifting from the base
– Leather section inspected for wear, tears, and stitching integrity
– Upgrades or restores the cabin’s interior finish without a full retrim
– Straightforward swap for a cracked, worn, or non-wood replacement wheel

Compatibility & Fitment
Fitment: Mercedes-Benz W202 C200
Placement: Steering Column (Front)

Condition & Inspection
Wood trim and leather were checked by hand for cracking, peeling, and loose stitching. Minor surface wear typical of a used wheel may be present, but the unit is structurally sound and ready to install.

Installation Information
This wheel fits onto the original W202 steering column hub without modification. If your car has airbag or steering-mounted controls, check wiring and connector compatibility before swapping.

Advantages
For C200 owners wanting the wood-and-leather cabin look, this gives back that factory-style finish without the cost of a full retrim or sourcing new-old-stock parts. It’s an easy way to lift the interior’s feel at a fraction of the price of a new wheel.

Product Overview
This used 722.6 five-speed automatic gearbox was removed from a Mercedes-Benz W202 C200. The 722.6 is the five-speed unit that replaced the older four-speed 722.3/722.4 boxes, offering smoother shift points and better response. This unit was taken from a working vehicle and checked for shift behaviour before being listed
Key Features
– Original 722.6 five-speed automatic, factory-matched to the W202 C200
– Verified shift pattern through all gears before removal
– Genuine used Mercedes-Benz unit, not a rebuild or aftermarket copy
– Lower cost alternative to a remanufactured or brand-new gearbox
– Suitable replacement when the current gearbox is slipping, jerking, or failing to shift properly

Compatibility & Fitment
Fitment: Mercedes-Benz W202 C200
Transmission Code: 722.6
Placement: Engine Bay / Transmission Tunnel

Condition & Inspection
This gearbox was tested for correct gear engagement and checked for fluid leaks and unusual noise prior to removal. It shows wear consistent with normal use, but no slipping or delayed engagement was found during inspection.

Installation Information
This unit bolts directly into the original W202 mounting points and driveline. A full fluid and filter service is recommended at the time of installation, along with fitting by a technician experienced with Mercedes-Benz automatic transmissions.

Advantages
A tested, genuine 722.6 gearbox gives you factory-correct shift behaviour without the risk of an unverified rebuild or the cost of buying new. For C200 owners dealing with a failing transmission, it’s a reliable way to get back to smooth, predictable driving.

Key Features
– Designed to fit Mercedes-Benz W202 platform
– Supports consistent performance and reliability
– Thoroughly inspected and tested before listing
– Retains original fit and ease of installation
– Suitable replacement option for restoration and maintenance

Compatibility & Fitment
Fitment: Mercedes-Benz W202 (1993-2000)
Placement on Vehicle: Front

Condition & Inspection
This part has been checked to ensure it is in working order. Surfaces may show signs of use typical of a previously installed component, but functionality has been confirmed. Each item is visually inspected and verified to meet expectations for a used automotive part.

Installation Information
Installation is straightforward, designed for original mounting points and connections. Professional installation is recommended to achieve the best results and long-term reliability.

Advantages
Choosing this Mercedes W202 Engine C200 M111 provides a reliable way to maintain your vehicle’s function. With correct fitment and tested quality, it is a practical solution for keeping your vehicle running smoothly.

This component is offered as a ready-to-install part, ensuring that your Mercedes-Benz W202 continues to perform as expected in everyday driving conditions.

Key Features
– Designed to fit Mercedes-Benz W202 platform
– Supports consistent performance and reliability
– Thoroughly inspected and tested before listing
– Retains original fit and ease of installation
– Suitable replacement option for restoration and maintenance

Compatibility & Fitment
Fitment: Mercedes-Benz W202 (1993-2000)
Placement on Vehicle: Front

Condition & Inspection
This part has been checked to ensure it is in working order. Surfaces may show signs of use typical of a previously installed component, but functionality has been confirmed. Each item is visually inspected and verified to meet expectations for a used automotive part.

Installation Information
Installation is straightforward, designed for original mounting points and connections. Professional installation is recommended to achieve the best results and long-term reliability.

Advantages
Choosing this Mercedes W202 Rear Differential 3.07 C200 M111 provides a reliable way to maintain your vehicle’s function. With correct fitment and tested quality, it is a practical solution for keeping your vehicle running smoothly.

This component is offered as a ready-to-install part, ensuring that your Mercedes-Benz W202 continues to perform as expected in everyday driving conditions.

Key Features
-Designed specifically for the Mercedes-Benz W202 platform-
-OEM Comfort Control Module (CCM)
-Manages central locking, interior lighting, and convenience functions
-Ensures smooth and coordinated electronic system operation
-Built to match original mounting points and electrical connections
-Cleaned, inspected, and tested for proper functionality
-Compatible with multiple W202 variants

Compatibility & Fitment
This component is compatible with Mercedes-Benz W202 models manufactured between 1993 and 2000. It is designed to integrate seamlessly with the original electrical and comfort system.

Fitment:
Mercedes-Benz W202 C-Class (1993–2000)

Placement on Vehicle:
Interior – Under Dashboard / Passenger Footwell Area (varies by model).

Condition & Inspection
This is a genuine used OEM comfort control module sourced from a W202 donor vehicle. Each unit is thoroughly inspected for electronic response, connector condition, and overall functionality. Minor cosmetic signs such as surface wear or aging may be present due to prior use, but these do not affect performance when properly installed.

Installation Information
The comfort control module is designed as a direct replacement component and fits into the original mounting location. Installation involves connecting wiring harnesses and securing the unit. Professional installation and coding (if required) are recommended to ensure proper operation.

Advantages
Choosing this used OEM Mercedes W202 Comfort Control Module provides an affordable solution for restoring convenience features and system reliability. OEM components ensure precise fitment, stable performance, and long-term durability compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while maintaining the authenticity and value of your Mercedes-Benz W202.

An excellent choice for restoring full comfort and convenience functionality in your Mercedes-Benz W202.

Key Features
-Designed specifically for the Mercedes-Benz W202 platform-
-OEM Manual Air Conditioning Control Unit
-Controls fan speed, airflow direction, and temperature manually
-Provides simple and reliable climate control operation
-Built to match original dashboard fitment and control connections
-Cleaned, inspected, and tested for proper functionality
-Compatible with multiple W202 variants

Compatibility & Fitment
This component is compatible with Mercedes-Benz W202 models manufactured between 1993 and 2000. It is designed to integrate seamlessly with the original manual climate control system.

Fitment:
Mercedes-Benz W202 C-Class (1993–2000)

Placement on Vehicle:
Interior – Dashboard Center Console.

Condition & Inspection
This is a genuine used OEM manual aircond controller sourced from a W202 donor vehicle. Each unit is thoroughly inspected for knob condition, control response, and overall functionality. Minor cosmetic signs such as surface wear or aging may be present due to prior use, but these do not affect performance when properly installed.

Installation Information
The manual aircond controller is designed as a direct replacement component and fits into the original dashboard slot. Installation involves connecting mechanical controls or wiring depending on variant. Professional installation is recommended to ensure proper operation and fitment.

Advantages
Choosing this used OEM Mercedes W202 Manual Aircond Controller provides an affordable solution for restoring basic climate control functionality. OEM components ensure precise fitment, reliable operation, and long-term durability compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while maintaining the authenticity and value of your Mercedes-Benz W202.

An excellent choice for restoring simple and reliable climate control operation in your Mercedes-Benz W202.

Key Features
-Designed specifically for the Mercedes-Benz W210 platform
-Available Each – Front Left, Front Right, Rear Left, Rear Right
-OEM door panel ensuring proper fit and alignment
-Provides structural protection and secure closure
-Cleaned and visually inspected for condition and fitment
-Maintains original exterior styling and finish
-Compatible with multiple W210 variants including E200, E230, E240, E280, E320

Compatibility & Fitment
This component is compatible with Mercedes-Benz W210 models manufactured between 1995 and 2002. It is designed to align with original mounting points and body structure.
Fitment:
Mercedes-Benz W210 E-Class (1995–2002)

Placement on Vehicle:
Front or Rear – Left/Right Side

Condition & Inspection
This is a genuine used OEM door sourced from a W210 donor vehicle. Each unit is thoroughly inspected for structural condition, hinge mounting points, and overall alignment. Minor cosmetic imperfections such as scratches, dents, or paint wear may be present due to prior use, but these do not affect fitment.

Installation Information
The door is designed as a direct replacement component and mounts using original hinges and latch mechanisms. Installation may require transferring internal components such as locks, regulators, or trim. Professional installation is recommended to ensure proper alignment and fit.

Advantages
Choosing this used OEM Mercedes W210 Door provides an affordable solution for restoring your vehicle’s structure and appearance. OEM components ensure precise fitment, durability, and factory-level alignment compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while preserving the authenticity and value of your Mercedes-Benz W210.

An excellent choice for restoring proper body structure and original styling in your Mercedes-Benz W210.

Key Features
-Designed specifically for the Mercedes-Benz W202 platform
-OEM Wiper Linkage and Motor Assembly
-Ensures smooth and synchronized wiper movement
-Built to match original mounting points and electrical connections
-Cleaned, inspected, and tested for proper functionality
-Provides reliable windshield cleaning performance
-Compatible with multiple W202 variants including C180, C200, C220, C230

Compatibility & Fitment
This component is compatible with Mercedes-Benz W202 models manufactured between 1993 and 2000. It is designed to integrate seamlessly with the original wiper system.
Fitment:
Mercedes-Benz W202 C-Class (1993–2000)

Placement on Vehicle:
Front – Under Windshield / Wiper Mechanism Area

Condition & Inspection
This is a genuine used OEM wiper linkage and motor set sourced from a W202 donor vehicle. Each unit is thoroughly inspected for motor operation, linkage movement, and mounting condition. Minor cosmetic signs such as surface wear or aging may be present due to prior use, but these do not affect performance.

Installation Information
The wiper linkage and motor set is designed as a direct replacement component and mounts to the original wiper assembly points. Installation typically involves removing the cowl panel, disconnecting the motor wiring, and securing the new unit. Professional installation is recommended to ensure proper alignment and operation.

Advantages
Choosing this used OEM Mercedes W202 Wiper Linkage and Motor Set provides an affordable solution for restoring proper windshield wiping performance and driving visibility. OEM components ensure precise fitment, reliable operation, and long-term durability compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while preserving the authenticity and value of your Mercedes-Benz W202.

An excellent choice for restoring smooth and dependable wiper functionality in your Mercedes-Benz W202.

Key Features
-Designed specifically for the Mercedes-Benz W202 platform
-OEM Manual Seat Set – Front and Rear Included
-Provides comfort, support, and proper seating position
-Built to match original mounting points and interior design
-Cleaned and visually inspected for condition and usability
-Maintains original interior styling and finish
-Compatible with multiple W202 variants including C180, C200, C220, C230

Compatibility & Fitment
This component is compatible with Mercedes-Benz W202 models manufactured between 1993 and 2000. It is designed to fit seamlessly with the original seat mounting points and interior layout.
Fitment:
Mercedes-Benz W202 C-Class (1993–2000)

Placement on Vehicle:
Front and Rear Passenger Compartments.

Condition & Inspection
This is a genuine used OEM manual seat set sourced from a W202 donor vehicle. Each unit is thoroughly inspected for frame condition, adjustment mechanisms, and upholstery quality. Minor signs of wear such as fabric aging, creases, or surface marks may be present due to prior use, but these do not affect functionality.

Installation Information
The seats are designed as a direct replacement and mount to the original floor mounting points. Installation typically involves removing existing seats and securing the replacement set using factory bolts. Professional installation is recommended to ensure proper alignment and secure fitting.

Advantages
Choosing this used OEM Mercedes W202 Manual Seat Full Set provides an affordable solution for restoring comfort and interior appearance. OEM components ensure precise fitment, durability, and factory-level quality compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while preserving the authenticity and value of your Mercedes-Benz W202.

An excellent choice for restoring interior comfort and original seating quality in your Mercedes-Benz W202.

Key Features
-Designed specifically for the Mercedes-Benz W202 platform
-Available Each – Front Left, Front Right, Rear Left, Rear Right
-OEM door panel ensuring proper fit and alignment
-Provides structural protection and secure closure
-Cleaned and visually inspected for condition and fitment
-Maintains original exterior styling and finish
-Compatible with multiple W202 variants including C180, C200, C220, C230

Compatibility & Fitment
This component is compatible with Mercedes-Benz W202 models manufactured between 1993 and 2000. It is designed to align with original mounting points and body structure.
Fitment:
Mercedes-Benz W202 C-Class (1993–2000)

Placement on Vehicle:
Front or Rear – Left/Right Side

Condition & Inspection
This is a genuine used OEM door sourced from a W202 donor vehicle. Each unit is thoroughly inspected for structural condition, hinge mounting points, and overall alignment. Minor cosmetic imperfections such as scratches, dents, or paint wear may be present due to prior use, but these do not affect fitment.

Installation Information
The door is designed as a direct replacement component and mounts using original hinges and latch mechanisms. Installation may require transferring internal components such as locks, regulators, or trim. Professional installation is recommended to ensure proper alignment and fit.

Advantages
Choosing this used OEM Mercedes W202 Door provides an affordable solution for restoring your vehicle’s structure and appearance. OEM components ensure precise fitment, durability, and factory-level alignment compared to aftermarket alternatives. Reusing original parts also supports environmentally responsible vehicle maintenance while preserving the authenticity and value of your Mercedes-Benz W202.

An excellent choice for restoring proper body structure and original styling in your Mercedes-Benz W202.